
How to Apply Bullet Wound Prosthetic Makeup With Steve LaPorte
In this FREE excerpt from the Stan Winston School of Character Arts course, Terminator Makeup FX Part 2: Prep, Apply & Paint, Academy Award and Emmy-winning makeup artist Steve LaPorte (Terminator 2 & 3, Beetlejuice, The Lost Boys) demonstrates how to apply instant bullet wounds to an actor’s neck. These are the same bullet hits that were used on Arnold Schwarzenegger in Terminator 2: Judgment Day!
Jump To Section
- Using Pros-Aide and Paper Towels to Apply Practical Bullet Hits
- Sticking the Paper Towel onto the Bullet Hit Prosthetic
- Prepping the Skin and Applying the Bullet Wound Transfer
- Final Touches for Your Terminator-Inspired Bullet Wound Makeup
To watch the complete instructional video, click the player above!
In this lesson, makeup master Steve LaPorte shares the best techniques on how to apply practical bullet hits using Pros-Aide transfers, paper towels, alcohol, and Q-tips. If you’ve ever wanted to recreate a T-800-inspired look or use these methods for your very own character makeup, LaPorte is here to break down the same techniques he used for the iconic sci-fi action sequel.
Come with us if you want to learn!
Using Pros-Aide and Paper Towels to Apply Practical Bullet Hits
LaPorte’s Pros-Aide transfers are already positioned sculpted onto a silicone-coated piece of acetate, which will very easily peel off. He takes you step-by-step to show what you’ll do with them from start to finish.
First, you'll apply a light coating of Pros-Aide adhesive over the transfers to make them sticky.
(As actor Brock Markham prepares to be made up in bullet wounds, Steve LaPorte holds up the must-have materials for this lesson: your bullet hit transfer and a piece of Viva paper towel.)
Next, cut a square piece of Viva paper towel to about a 4x4 size. LaPorte opts for Viva brand specifically since it’s a high cotton content paper towel.
This will come in handy when the Pros-Aide dries because you can then:
-
Stick the paper towel onto the transfer.
-
Flip it over.
-
Cut out your pieces.
-
Stick the bullet hits into place.
-
Secure the paper towel using alcohol on a brush.
This process is quick and requires just a little bit of pre-prep to give you perfectly blended bullet hits.
Once you’ve applied a light coating of Pros-Aide onto your transfer, it’s important to make sure that it isn’t wet at all, or else it’ll really bond to the paper towel, LaPorte says.
To prep your transfer, use a blow dryer for about 20 seconds to ensure the transfer is completely dry before moving onto the next step.
(LaPorte uses a blow dryer all over the transfer to make sure it's dry before sticking the paper towel onto it.)
Instead of using waterslide decal paper, LaPorte prefers using a paper towel for the transfer process because it makes the Pros-Aide piece a lot more flexible when applying it.
Sticking the Paper Towel onto the Bullet Hit Prosthetic
Now that your transfer is dry, it’s time to stick the paper towel into place.
(LaPorte sticks the paper towel into place and presses the paper towel and transfer together.)
As you gently press the paper towel and transfer together, you’ll be able to see where your pieces are. Application to your actor's neck is only a few steps away.
Carefully trim the bullet hits out, including the flashing.
(LaPorte trims out the set of four bullet holes that will be applied on Markham.)
“You can’t do this with the waterslide paper because it’s a little stiff; it’s not as flexible,” LaPorte explains. “[The paper towel] allows me to wrap it around his neck and get it on a curved surface.”
After you’ve cut your pieces, slowly peel the plastic off your bullet hits.
(Once he's trimmed the pieces, LaPorte carefully peels off the plastic.)
Prepping the Skin and Applying the Bullet Wound Transfer
Next, prep the actor’s skin prior to applying the bullet hits. You can dip your finger in 99% isopropyl alcohol and simply sweep it across the skin.
(LaPorte applies alcohol onto Markham's neck just before applying the bullet hit transfer.)
Then, place the transfer onto the actor’s neck. The bottom surface of the bullet hits will be very sticky and easy to press onto the skin.
(The transfer is positioned and placed onto the neck.)
LaPorte created the transfers used for the lesson from the Terminator originals, he says. “They’re actually made from the original bullet hits. I set them right side-by-side and sculpted them to match the placement and everything. I did a template, so they’re the same bullet hits that we used on Arnold.”
Final Touches for Your Terminator-Inspired Bullet Wound Makeup
For the final steps, apply alcohol all over the paper towel. You can use a Q-tip, or an alcohol spray to save time.
(LaPorte sprays 99% alcohol on the area to help make peeling the paper towel from the glue easier.)
Take a Q-tip and press the paper towel into the skin. This will help loosen up the paper towel from the glue and make it easy to peel off.
Then, peel off the paper towel to reveal your bullet hits. Blend the edges into the surrounding skin with a Q-tip for a natural look.
(LaPorte blends any visible edges to create a wounded, skin-like appearance.)
Lastly, set your transfer using a powder puff and colorless powder.
(LaPorte powders the transfer to set it.)
And voilà—you have instant bullet hits!
(Markham's newly acquired bullet hits, courtesy of LaPorte.)
“These are great if you’re on set and you want to get something on quick. You can walk right up and put an instant bullet hole on somebody,” LaPorte says. “Just takes a little prep and a little understanding of the process.”
WATCH THE “TERMINATOR MAKEUP FX” COURSE WITH STEVE LAPORTE:
